Model ：
A90 Base, Rover, External RadioBase + Rover + External 35W Radio, Trimble BD990 Main Board, Fourth Generation Tilt Survey System, All GNSS Signals Included, 4G Modem, Tilt Centering, Dua Slot Hot-Swappable Batteries, Android SurPad, IP68 Rating, P9III GNSS Controller
Bince A90 GPS RTK GNSS System Base + Rover + External 35W Radio Set
A90 with its Trimble BD990 main board and 336 channels, provides an excellent on-board real-time navigation solution with high accuracy. All GNSS signals are included, no additional cost
Featuring a new, high accuracy multi constellation-antenna, a powerful UHF transmitter and the 4G modem, fit various networks and protocols
Fourth-generation tilt survey system. IMU inertial navigation module. 400Hz dynamic output. The tilt range is 60 ° and the accuracy is better than 2cm
The dual-slot for two Smart hot-swappable batteries so no need to power off to replace the battery
SurPad 4.0 with new CAD graphic drawing functions, layers procession and predefined coordinate system, brings a big change in user experience and accessibility
BINCE A90 GNSS RECEIVER
GNSS ENGINE | |
MAIN BOARD | Trimble BD990 |
CHANNELS | 336 |
SATELLITE TRACKED | GPS: L1CA/L1C/L2C/L2P/L5 |
GLONASS: L1CA/L2C/L2P/L3/L5 | |
BeiDou: B1/B2/B3 | |
Galileo: E1/E5/AltBOC/E5a/E5b/E6 | |
IRNSS5: L5 | |
SBAS: L1/L5 | |
QZSS: L1CA/L1C/ L2C/L5/L6 |
PERFORMANCE | |
POST PROCESSING ACCURACY (RMS) | |
Horizontal | 2.5mm(0.008ft) + 0.5ppm |
Vertical | 5mm(0.016ft) + 0.5ppm |
REAL-TIME KINEMATIC POSITION (RMS) | |
Horizontal | 8mm(0.03ft) + 0.5ppm |
Vertical | 15mm(0.05ft) + 0.5ppm |
RTK Initialization Time | <10s |
RTK Initialization Reliability | >99.99% |
Data Storage | 8G |
CMR&RTCM | RTCM2.3, RTCM3.X, RTCM3.2, CMR, CMR+ |
Bluetooth | V2.0 Class2 |
Network Communication | All Netcom 4G |
Tilt Survey System | Fourth Generation, IMU inertial navigation module, 400Hz dynamic output, The tilt range is 60 ° and the accuracy is better than 50px |
Water/Dustproof | IP68 |
Humidity | 100% condensing |
Internal Radio Transmitting power | 0.5W/2W adjustable |
External Radio | TRU35 External Radio (Optional)- Transmitting power 5W/35W adjustable |
Supports multiple protocols | PCC-EOT, Trimtalk450S, TrimMarkⅢ, South, HiTarget, GeoTalk, GeoMark |
Internal Battery | 3400mAh lithium-ion rechargeable battery*2 |
Dimensions Dimensions(W×H) | 390px*190px |
Shock and vibration | Designed to survive a 2m natural fall onto concrete |
TRU35 External Radio
TRU35 External Radio | |
Type | Tx-Rx |
Multi-Channel | 16 |
Frequency Range | 410-470MHz |
Power | 2/35W (Low/High Power Adjustable) |
Antenna | 5.5dBi External High-gain Antenna (HGA) with 5m Antenna Feeder Cable |
Operating Range | ≥15km (High Power) (typical) |
Communication | Bluetooth Configuration/Bluetooth Data Transmission |
Radio Relay Function | Yes |
Protocol | PCC-EOT, TrimTalk 450S, TrimMark III, South, HiTarget, GeoTalk, GeoMark |
Waterproof | IP67 |
P9III GNSS CONTROLLER
System | |
System | Android 9 (64 bit) |
Processor | Eight-Core ARM Cortex-A53 Processor, up to 1.8GHz |
RAM | 2GB DDR3 |
Internal Memory | 16GB |
Field Software | Android Field Software SurPad 3.0/ SurPad 4.0 |
Display | |
Screen | 4.3 inches 60Hz Blanview TFT |
Resolution | 480 x 800 WVGA |
Camera | |
Rear | 13.2MP |
Communication | |
Bluetooth | 4.1+Bluetooth LE |
WIFI | 802.11b/g/n WLAN |
I/O Connectors | USB Type C |
Keypad | Physical Full-size 54 Keys Keyboard Buttons |
TF Card Slot | Up to 512GB |
Writing Pen | Yes |
Internal Modem Band | 2G: GSM/GPRS/EDGE/CDMA95 |
3G: TD-SCDMA/WCDMA/EVDO | |
4G: TDD-LTE/FDD-LTE |
Physical | |
Dimensions | 194mm x 90mm x 40mm |
Weight | 570g Including Battery |
Power | 6000mAh,3.8V, 22.8Wh |
Single-battery Life | > 20 Hours |
Operating Temperature | -30℃ to +60℃ |
Storage Temperature | -40℃ to +80℃ |
Humidity | 5%-95%RH Non-condensing |
Waterproof | IP67 |
Shock Resistance | 1.2m (3.94ft) Free Drop |
SurPad 4.0 Professional Field Survey Software (Android)
Click Here to download the user manual for SurPad 4.0.
New CAD Graphic Drawing functions. You cancollect points to line easily in the field. SurPad 4.0 also supports Layersprocession function, input/export DXF, SHP file.
Predefined with multiple countries 1600coordinate system, projection mode, units and file encode scheme. Thecoordinated system can be transmitted through a QR code.
Available in multiple languages andcompatible with different Android devices.
Support Geoid and Grid file import and RTCM 1021-1027 data analysis.
Equipped with professional road design andstake out function, SurPad 4.0 can solve complex road data easily.
BINCE A90 GNSS RTK BASE+ROVER+EXTERNALRADIO PACKING LIST
Packing List | |
A90 GNSS Receiver | x2 |
Whip Antenna | x2 |
TRU35 External Radio | x1 |
External High-gain Antenna (HGA) with 5m Antenna Feeder Cable | x1 |
P9III Controller | x1 |
SurPad 4.0 Software (Android) | x1 |
Controller Holder | x1 |
Smart Hot-swappable Lithium Battery | x4 |
Dual Slot Charger | x2 |
Power Adapter | x3 |
USB Type C to USB-A Cable | x1 |
5-pin Lemo Cable | x1 |
Measuring Tape 3m | x2 |
Connection Plate | x2 |
Screw Thread Connector | x1 |
External Heavy Duty Power Cable | x1 |
Extension Pole 750px | x1 |
Extension Pole 4625px | x1 |
Carbon Fibre Surveyors Pole 2.5m | x1 |
Heavy Duty Wood Tripod | x1 |
Heavy Duty Aluminium Tripod | x1 |
Hard Carry Case | x2 |