Model ：
N90 Base, Rover, External RadioBase + Rover + External 35W Radio, Novatel OEM729 main board, Built-in UHF/4G, 555 Channels, All GNSS Signals Included, 4G Modem, Tilt Centering, Dua Slot Hot-Swappable Batteries, Web UI Control, Android SurPad, IP68 Rating, HC2 GNSS Controller
Bince N90 GPS RTK GNSS System Base + Rover + External 35W Radio Surveying Set
Key Feature
N90 with Novatel OEM729 main board and 555 channels, provides an excellent
on-board real-time navigation solution with high accuracy. All GNSS signals are included, no additional costFeaturing a new, high accuracy multi constellation-antenna, a powerful UHF transmitter and the 4G
modem, fits various networks and protocolsWhen the pole is tilted in 30 degrees, N90 still could get the right point data by the automatic calculation and correction system under the tilt survey mode
The dual slot for two Smart hot-swappable batteries so no need to power off to replace the battery
Applies WIFI connection to realize Web UI control designed to manage, monitor the setting of the receiver and download data using laptop or PC, smartphone or tablet
Bundled Android field software SurPad brings a big change in user experience and accessibility
BINCE N90 GNSS RECEIVER
GNSS ENGINE | |
CHANNELS | 555 |
SATELLITE TRACKED | GPS: L1CA/L1C/L2C/L2P/L5 |
GLONASS: L1CA/L2C/L2P/L3/L5 | |
BeiDou: B1/B2/B3 | |
Galileo: E1/E5/AltBOC/E5a/E5b/E6 | |
IRNSS5: L5 | |
SBAS: L1/L5 | |
QZSS: L1CA/L1C/ L2C/L5/L6 | |
DATA RATE | MAXIMUM 100Hz |
PERFORMANCE | |
POST PROCESSING ACCURACY (RMS) | |
Horizontal | 2.5mm(0.008ft) + 0.5ppm |
Vertical | 5mm(0.016ft) + 0.5ppm |
REAL-TIME KINEMATIC POSITION (RMS) | |
Horizontal | 8mm(0.03ft) + 0.5ppm |
Vertical | 15mm(0.05ft) + 0.5ppm |
RTK Initialization Time | <10s |
Hot Start | <19s (typical) |
RTK Initialization Reliability | >99.99% |
Antenna | Built-In Antenna Integrating GNSS, Bluetooth, WLAN and 4G Modules |
Electronic Bubble | Yes |
Smart Battery | Dual Slot for Two Smart Hot-swappable Batteries |
Tilt Survey Sensor | Automatic Correct in 30 Degrees |
Internal Memory | 8GB Standard |
TF Card | Supports TF Cards Expansion Slot Up to 32GB |
Internal Radio | |
Transceiver Module | Built-in Radio Transceiver Module |
Power | 0.5/2W (Low/High Power Adjustable) |
Operating Range | ≥5km (High Power) (typical) |
Frequency Range | 410-470MHz |
Protocol | PCC-EOT, TrimTalk 450S, TrimMark III, South, GeoTalk, GeoMark |
Internal Modem | |
Type | 4G LTE (Fits various networks) |
Module | EC20 Multi-mode LTE Module |
Frequency Band | GSM/GPRS/LTE/UMTS/WCDMA |
Communication | |
System | Based on Linux |
Bluetooth | 2.1+ EDR Class 2 |
WIFI | IEEE 802.11 b/g/n WLAN |
Web UI | To Upgrade the Software, Manage the Status and Settings, Data Download, etc. Via Smartphone, Tablet or Other Internet Enabled Electronic Devices |
Data Security | When Measuring, the Data is Stored in Three Places for Backup |
Reference Output | RTCM2.3, RTCM3.X, RTCM3.2, CMR, CMR+, RTCA, NOVATELX |
Field Software Support | SurvPad (Android), MicroSurvey FieldGenius or Carlson SurvCE, etc. |
I/O Connectors | |
TNC Port | Connecting Built-in Radio Antenna |
5-pin Lemo Port | Connecting External Power Supply and External Radio |
7-pin Lemo Port (USB + serial port) | Connecting PC and Handheld |
Dimensions | 156mm x 76mm |
Bottom Cover | Aluminium Magnesium Alloy |
Power | 2 Rechargeable and Replaceable 7.4V 3400mAH Intelligent Lithium Batteries |
Battery Slot | Dual Slot for Two Smart Hot Swappable Lithium Batteries with Power Level Indicator (No Need to Power Off to Replace the Battery) |
Working Time | > 8 Hours |
Environmental | |
Operating Temperature | -30℃ to +60℃ |
Storage Temperature | -40℃ to +80℃ |
Humidity | 100% Condensing |
Waterproof | IP68 |
Shock Resistance | 2m (6.56ft) Pole Drop, 1.2m (3.94ft) Free Drop |
TRU35 External Radio
TRU35 External Radio | |
Type | Tx-Rx |
Multi-Channel | 16 |
Frequency Range | 410-470MHz |
Power | 2/35W (Low/High Power Adjustable) |
Antenna | 5.5dBi External High-gain Antenna (HGA) with 5m Antenna Feeder Cable |
Operating Range | ≥15km (High Power) (typical) |
Communication | Bluetooth Configuration/Bluetooth Data Transmission |
Radio Relay Function | Yes |
Protocol | PCC-EOT, TrimTalk 450S, TrimMark III, South, HiTarget, GeoTalk, GeoMark |
Waterproof | IP67 |
HC2 GNSS CONTROLLER
System | |
System | Android 7.1 |
Processor | Quad-Core ARM Cortex-A7 Processor, up to 1.1GHz |
RAM | 1GB DDR3 |
Internal Memory | 8GB |
Display | |
Screen | 4.3 inches Blanview TFT Transflective Touch Screen |
Resolution | 480 x 800 VGA |
Camera | |
Rear | 8MP |
Communication | |
Bluetooth | 2.1+ EDR |
WIFI | 802.11b/g/n WLAN |
I/O Connectors | USB Type C |
Keypad | Physical Backlit Buttons |
Internal Modem Band | 2G: GSM/GPRS/EDGE/CDMA95 |
3G: TD-SCDMA/WCDMA/EVDO | |
4G: TDD-LTE/FDD-LTE |
Physical | |
Dimensions | 192mm x 93mm x 42mm |
Weight | 598g Including Battery |
Power | 1 Rechargeable and Replaceable 7.4V 3400mAH Intelligent Lithium Batteries |
Battery Slot | Same as the GNSS Receiver Battery Model |
Single-battery Life | > 20 Hours |
Recharge Time | 4 Hours |
Operating Temperature | -30℃ to +65℃ |
Storage Temperature | -40℃ to +80℃ |
Humidity | 5%-95%RH Non-condensing |
Waterproof | IP67 |
Shock Resistance | 1.2m (3.94ft) Free Drop |
SurPad 4.0 Professional Field Survey Software (Android)
Click Here to download the user manual for SurPad 4.0.
New CAD Graphic Drawing functions. You cancollect points to line easily in the field. SurPad 4.0 also supports Layersprocession function, input/export DXF, SHP file.
Predefined with multiple countries 1600coordinate system, projection mode, units and file encode scheme. Thecoordinated system can be transmitted through a QR code.
Available in multiple languages andcompatible with different Android devices.
Support Geoid and Grid file import and RTCM 1021-1027 data analysis.
Equipped with professional road design andstake out function, SurPad 4.0 can solve complex road data easily.
BINCE N90 GNSS RTK BASE+ROVER+EXTERNALRADIO PACKING LIST
Packing List | |
N90 GNSS Receiver | x2 |
UHF Antenna | x2 |
TRU35 External Radio | x1 |
External High-gain Antenna (HGA) with 5m Antenna Feeder Cable | x1 |
HC2 Controller | x1 |
SurvPad 4.0 Software (Android) | x1 |
Controller Holder | x1 |
Smart Hot-swappable Lithium Battery | x5 |
Dual Slot Charger | x2 |
Power Adapter | x3 |
USB Type C to USB-A Cable | x1 |
5-pin Lemo Cable | x1 |
Measuring Tape 3m | x2 |
Connection Plate | x2 |
Screw Thread Connector | x1 |
External Heavy Duty Power Cable | x1 |
Extension Pole 750px | x1 |
Extension Pole 4625px | x1 |
Carbon Fibre Surveyors Pole 2.5m | x1 |
Heavy Duty Wood Tripod | x1 |
Heavy Duty Aluminium Tripod | x1 |
Hard Carry Case | x2 |